CNT Racing Mini Cooper catted downpipe for R55 R56 R57 R58 R59 R60 - CNT Racing
CNT Racing Mini Cooper catted downpipe for R55 R56 R57 R58 R59 R60 - CNT Racing
CNT Racing Mini Cooper catted downpipe for R55 R56 R57 R58 R59 R60 - CNT Racing
CNT Racing Mini Cooper catted downpipe for R55 R56 R57 R58 R59 R60 - CNT Racing
Roll over image to zoom in
CNT Racing Mini Cooper catted downpipe for R55 R56 R57 R58 R59 R60 - CNT Racing
CNT Racing Mini Cooper catted downpipe for R55 R56 R57 R58 R59 R60 - CNT Racing
CNT Racing Mini Cooper catted downpipe for R55 R56 R57 R58 R59 R60 - CNT Racing
CNT Racing Mini Cooper catted downpipe for R55 R56 R57 R58 R59 R60 - CNT Racing

CNT Racing Mini Cooper catted exhaust pipe for R55 R56 R57 R58 R59 R60

CNT RacingSKU: HD-9725
Price:
$299.99
Stock:
In stock Pre-order

Description

CNT Racing Mini Cooper High Flow catted downpipe R55 R56 R57 R58 R59 R60


* Come with a metallic high flow cat
* Quality Welded throughout the whole system!
* Straight flow, Mandrel Bent, 2.5" piping
* Reduced back-pressure for increased top-end performance
* Enhanced aggressive high-RPM sound
* 100 cell Custom high flow metal substrate Cats.
* 100% Direct Bolt-On & utilizes stock ball joints and clamps
Due to this part replacing the factory Cat this may not be legal in your state, and may cause a check engine light. It will not pass emissions. Be prepared for this as it can NOT be returned for these reason.

Installation note: Remove the lower heat shield and the bottom bolts on the upper shield for installation.

Not for sale in the state of California, New York, and Maine.

Customer Reviews

Based on 6 reviews
33%
(2)
67%
(4)
0%
(0)
0%
(0)
0%
(0)
J
Jason Kerbs
Great Product Easy Install

Great product!!! EASY install and fit better than the custom down pipe that I was replacing!!! No CEL after install!!!! Will be ordering a cat less for the track for sure!!!

S
Shopify
Needs install instruction

I was able to install pipe with some diculty. It would be nice to have some install instructions to help with the installation
If the pipe. Since this is one piece and everything fits exactly to be able to install this you need to remove the studs to allow for the bottom brackets to go on then you can replace the studs. I am in the process of getting the car tuned so I am looking forward to seeing the end results. Also there was only a slight change in the exhaust sound so if you are looking for a louder exhaust you may need to do more than this pipe.

S
Shopify
Needs install instruction

I was able to install pipe with some diculty. It would be nice to have some install instructions to help with the installation
If the pipe. Since this is one piece and everything fits exactly to be able to install this you need to remove the studs to allow for the bottom brackets to go on then you can replace the studs. I am in the process of getting the car tuned so I am looking forward to seeing the end results. Also there was only a slight change in the exhaust sound so if you are looking for a louder exhaust you may need to do more than this pipe.

S
Shopify
Great but not perfect.

First off its a very high quality downpipe. The weld are TIG and are done extremely well. Off the bat I definitely notice performance gains, because I was tuned before the install. As for 200 miles I have not gotten a cel whether or not its from that tune. I was informed this is a 200 cel Downpipe for the record.

However, the install was from hell. The brackets will need to be dremeled as well as the inside ports of the o2 sensor to get it to fit. BE SURE WHEN INSTALLING TO COMPLETELY REMOVE THE NUT AND BOLTS OF THE TURBO BEFORE installing this. Just a heads up.

S
Shopify
Great but not perfect.

First off its a very high quality downpipe. The weld are TIG and are done extremely well. Off the bat I definitely notice performance gains, because I was tuned before the install. As for 200 miles I have not gotten a cel whether or not its from that tune. I was informed this is a 200 cel Downpipe for the record.

However, the install was from hell. The brackets will need to be dremeled as well as the inside ports of the o2 sensor to get it to fit. BE SURE WHEN INSTALLING TO COMPLETELY REMOVE THE NUT AND BOLTS OF THE TURBO BEFORE installing this. Just a heads up.

12

Estimate shipping

You may also like

Recently viewed